Are the G56 a good transmission?

Are the G56 a good transmission?

The G56 is a good trans and quiet with stock clutch, tried many fluids in mine and with stock clutch the amsoil mtg is the smoothest best fluid in my experience. Many options for aftermarket clutches which will make it louder in certain situations.

What years did the G56 come in?

Dodge started using this transmission in 2005 with the Dodge Ram 2500 and 3500, along with a 5.9 liter and 6.7 liter Cummins turbo diesel engine, remaining present in the Dodge Ram 2500 and 3500 medium-duty trucks all the way through 2018.

What vehicles use the G56 transmission?

G56 Transmission Specs

What does G56 refer to?

The G56 manual transmission was the last manual transmission available in a full-size pickup truck. Ram trucks began running this transmission in the 2005 model-year trucks as a mid-year change to phase out the cast-iron 6-speed New Venture Gear 5600 transmission.

Is G56 better than 68rfe?

Many people love the transmission and say the power difference is not noticeable and if you plan to delete and tune there is no difference except you will need a clutch but the g56 with a clutch can handle more power than the 68rfe.

How much torque can a G56 handle?

Registered. From what I have read the manufacturer rates the g56 up to 600 ft lbs of torque which who knows if that’s accurate or not. From personal experience though, mine is a 2015 and its fully deleted with anarchy tunes.

Who makes G56 transmission?

G56 Transmission Overview Manufactured in Brazil by Mercedes-Benz, the G56 transmission is a 6-speed manual transmission that was designed specifically for light and medium duty diesel trucks.

What kind of oil does a G56 transmission take?

The lube of choice is SAE 50 Mobile Delvac 1 Synthetic transmission fluid. It’s also the same lubricant used to refill our ’14 Ram 2500’s G56, which is out of warranty. It takes a little more than 9 quarts once the filter, pump, cooler, and lines are primed.

How long will a G56 last?

There are circumstances where the original clutch in a G56 will last in excess 100k miles. There are also situations where the clutch starts to slip at 15k miles.

Who made the G56?

Manufactured in Brazil by Mercedes-Benz, the G56 transmission is a 6-speed manual transmission that was designed specifically for light and medium duty diesel trucks.

How many miles can I get out of a 68RFE?

Some lucky and gentle drivers can get 75k plus on a MILDLY tuned 68rfe w\ trans tuning. We have customers call us all the time with 150k plus miles on STOCK trucks and they are still on their original transmission.

What is the best fluid to put in a G56 transmission?

What are the parts list for a Dodge G56 manual transmission?

Below you will find a detailed parts list for the Dodge G56 manual transmission that includes complete rebuilt transmissions, bearing rebuild kits with and without syncro rings, individual bearings, syncro components, gears, shaftscase, retainer and performance clutch kits.

Is the Nissan G56 a good transmission?

The G56 is a great transmission, and it is lighter than its predecessor the NV5600. The G56 is manufactured in Brazil, and has great reputation there. Here at High Gear we see all kinds of problems with different transmissions. The NV5600 gets hot and burns up, but the G56 breaks.

What is the gear ratio of a GMC G56?

The ratio’s of the G56 are: 1st gear 4.01, 2nd 2.32, 3rd 1.40, 4th 1.00, 5th 0.72 and reverse3.55. The G56 was designed as a replacement for the New Venture NV4500 5 speed. . The unit is a heavy duty synchronized unit.

What are the parts of a G56?

Select the G56 parts you require from the following list and give us a call. The ratio’s of the G56 are: 1st gear 4.01, 2nd 2.32, 3rd 1.40, 4th 1.00, 5th 0.72 and reverse3.55. The G56 was designed as a replacement for the New Venture NV4500 5 speed. . The unit is a heavy duty synchronized unit.