How do I change the settings on my AT MicroCell?

How do I change the settings on my AT MicroCell?

MicroCell settings

1. Open a web browser on your computer, and navigate to then click Manage Settings.
2. Click on your account type.
3. Enter your account information, then click Log in.
4. Click the desired wireless number that is linked to your MicroCell, then click Continue.

How do I setup my AT 3G MicroCell?

Activate & register

1. Write down your 3G MicroCell’s serial number as you will need it for online activation and for future reference.
2. To activate your AT MicroCell launch your web browser and visit:
3. Locate and click Activate.
4. Tap the desired account type.
5. Click Next.

Is ATT MicroCell still supported?

As of December 31st, 2017, the AT MicroCell has been discontinued. If you own a MicroCell and rely on it for placing calls at your home or at your office, now may be the time to start thinking about replacing it.

How do I set up my AT MicroCell?

Connect your MicroCell to a power outlet with the AC power adapter. The Power light on the front of the device will come on immediately. Within a few minutes, other lights will flash as a GPS signal is located and software is updated. Visit and follow the instructions on the screen.

How do I reset my AT 3G MicroCell?

Hold in the reset button on the back of the unit (you’ll need a paperclip), turn off the power to it and then restore power holding in the reset button for about 30 seconds. The MicroCell should go thru the entire Initial Activation sequence which will include downloading any updates if they are available.

How do I authenticate my AT MicroCell?

Open a web browser on your computer, and navigate to then click Manage Settings. Click your account type. Enter your myAT User ID and Password then click Log in. Note: If you do not have an AT login, please follow the prompts on the right side of the screen to register.

Why did AT stop selling MicroCells?

There is no replacement policy now for the MicroCell. AT stopped selling them at the end of 2017 because the MicroCell had reached its EOL., Once the service goes offline your only option will be to use WiFi-C, purchase a cellular booster, or switch carriers.

Why is MicroCell not working?

Network light – Restart your MicroCell by unplugging the power cord from the wall outlet for at least 10 seconds. It may take another 30 minutes for the network light to turn solid green. Network and GPS lights – Move your MicroCell to the place where it originally got a solid GPS light.