How do I factory reset my Polycom SoundPoint IP 331?

How do I factory reset my Polycom SoundPoint IP 331?

Polycom IP with Admin Password

1. Press Menu.
2. Navigate to Settings > Advanced.
3. Once prompted for a password, enter your admin password.
4. Select Admin Settings.
5. Navigate to Reset to Default then select Reset to Factory.
6. Your phone is now factory reset and the default admin password should be 456.

How do I manually configure a Polycom phone via web interface?

You can access the Polycom Web Configuration Utility using any compatible web browser installed on your PC.

1. Power on the phone.
2. Confirm that the PC and phone are on the network.
3. Enter phone’s IP address into your supported web browser.
4. For Username, enter: Polycom.
5. For Password, enter: 456.

How do I factory reset my Polycom SoundPoint IP 335?

How to factory reset Polycom 335 IP Phone

1. Step 1 How to factory reset Polycom 335 IP Phone. Hold 1+7+3+5 while powering on the device.
2. By default the password is 456. You can reset the password with the Mac Address on the back.
3. Now that the unit had reset configuration and rebooted select Setup.

How do I provision my Nextiva phone?

From the Nextiva Voice Admin Dashboard, click the Add link in the Devices tile. Select the Add Device radio button at the top of the screen. Select the phone model and enter the MAC address. Click the blue Assign button at the bottom of the screen.

How do I find my Polycom admin password?

Polycom’s default password is 456….Step 1: Try Reset with Default Password

1. Click on the Home button.
2. Scroll to the Settings (gear icon) and click on it.
3. Go to Advanced.
4. Enter the admin password (456 by default)
5. Go to Administration Settings.
6. Go to Reset to Defaults.
7. Go to Reset To Factory.
8. Say Yes when it asks Are you sure?

How do I connect my Polycom phone to my home?

1. Quick View. Turn your phone upside down and locate the connection ports.
2. Connect the LAN Ethernet cable from the wall jack to the phone.
3. Connect the. Ethernet cable. from the phone to the computer.
4. Connect the handset cord to the phone jack port.

Can I use a Polycom phone at home?

As long as it is a small number of phones it should be fine. – The Polycom’s will need to be pre-provisioned or you will need to setup an FTP, TFTP or HTTP server for the phones to contact and download thier config files, ring tones, etc.

How do I find my Polycom IP address?

To find out the IP address of your Polycom phone:

1. On the Polycom Phone press the Menu Button.
2. Scroll to the Status… menu item and press Select.
3. Scroll to the Platform… menu item and press Select.
4. Scroll to the Phone…
5. Scroll down see your phone IP address on the screen similar to IP: XXX.XXX.XXX.XXX.

How do I provision Polycom VVX?

1 On the phone, press Menu > Settings > Advanced and enter the phone’s password. The default is 456. 2 Choose Admin Settings > Network Configuration > Provisioning Server, and press the Select soft key.

How do you set up a Polycom Nextiva phone?

Press the Setup key and enter the password 456. Scroll down to Server Menu > Select > specify the Server Type (see table below) using the left and right arrows on the phone > OK….Provisioning Poly phones.

How many pages are there in Polycom IP 331 user manual?

Polycom Ip 331 User Manual Hide thumbs Also See for Ip 331 User manual- 25 pages Quick reference manual- 16 pages Short manual- 6 pages 1 Table Of Contents 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 pageof31Go /31 Contents

Does polypolycom provide support for software running on the product?

Polycom will provide support for software running on the Product if all of the following software that may be downloaded electronically via the internet or otherwise (the “Software”) is licensed, not sold.

What is Polycom’s liability for defective products?

TO THE FULL EXTENT ALLOWED BY LAW, POLYCOM EXCLUDES FOR ITSELF AND ITS Customer the purchase price paid for the defective product. All products that are replaced will become the property SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, of Polycom.