What is a 515 spray tip used for?

For example, a 515 tip will spray a 10-inch-wide fan and have a 15-thousandths of an inch orifice. It’s the combination of fan-width and orifice-size that determines how thick of a coating you’ll spray.

What is a 313 spray tip used for?

Product Description. The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What size spray tip should I use?

A basic rule of thumb is to use small tip sizes (such as 0.009in, 0.011in, 0.013in) for thin / low viscosity materials such as stains & lacquers, medium tip size (such as 0.015″, 0.017″, 0.019″) for acrylic latex / enamel / emulsion / primer etc., then for heavier viscosity coatings use large orifice sizes (such as …

What is a 514 spray tip used for?

The Reverse-A-Clean (RAC) 514 TC Pro SwitchTip is designed for wide surfaces and materials like solid color stains, enamels, primers, interior paints, paint + primers, and exterior paints.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

What is a 517 spray tip used for?

The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 210 spray tip used for?

Fine finish spray tips are used for cabinetry, furniture and interior trim work (for a smooth fine finish) example Graco FF LP spray tips: 210 or 310. Low pressure tips are used primarily for spraying with pressures between 55 to 76 bar (800 to 1100 psi).

What tip to use for spraying doors?

The best tip to use for spraying interior doors with an airless sprayer is a 310, or a 312 tip. These tips produce a 6-inch spray fan to coat doors quickly with less overlapping than using a smaller tip. I use the Graco RAC X spray tips for all of my airless spraying, including doors.

What is a 215 spray tip used for?

The 215 SwitchTip has a 0.015 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

What is a 411 spray tip used for?

What is a 413 spray tip used for?

The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 413 SwitchTip has a 0.013 inch orifice and produces an 8 to 10 inch fan. Reverse the SwitchTip to easily clear clogs.

How to choose the suitable tip/nozzle for sprayer?

Make sure to use your common sense. The last thing you want is to damage your property. Begin with the white tip or a nozzle with a wider angle. Start by keeping the spray wand at least 2 feet away from the surface. Ensure that the pressure washer itself is in good condition to maximize its efficiency.

What HVLP/airless sprayer to use?

Fuji 2203G Semi-PRO 2. This HVLP paint sprayer has the most powerful two-stage system in the market.

Fuji 3005-T70 Q5 Platinum. This HVLP paint sprayer has a powerful turbine motor that provides a faster painting time,making this device incredibly convenient and suitable for a range

REXBETI Ultimate-750 Paint Sprayer.

HomeRight Finish Max C800766.

How to clean airless paint sprayer?

Set Up Your Buckets. Depending on whether you’re spraying oil-based such as lacquer,or water-based paints such as emulsion,you’ll need to vary your paint sprayer cleaner.

Clear Out the Remaining Paint. Place the suction in your clean bucket and aim the gun at your empty bucket.

Cleaning the Various Filters.

Clean the Nozzles.

Scrub the Spray Gun.

How to use airless paint sprayer?

Prime the pump. You have to prime the pump to get rid of air bubbles and have your sprayer flowing properly.

Fill the hose and gun. After you have primed your machine,you can now fill your hose with paint and secure the tip.

Select the best tip for your project. A sprayer tip is fitted into the hole at the anterior of your airless sprayer gun.

Adjust Pressure. To set the appropriate pressure range for your job,look at the user guidebook for clear pressure adjustments.