What is kerapoxy cleaner?

What is kerapoxy cleaner?

Kerapoxy Cleaner is a detergent used to remove traces of epoxy grout such as Kerapoxy, Kerapoxy P, Kerapoxy Design, etc. from ceramic and glass mosaic coatings.

How do you use MAPEI kerapoxy cleaner?

Apply Kerapoxy Cleaner on the surface to be cleaned or on the traces of grout and leave standing for a few minutes. Then rub the surface with a Scotch-Brite® pad and rinse thoroughly with water. The product is particularly efficient on fresh grout.

How do you get rid of kerapoxy?

How to remove Epoxy Grout Residue or Haze

1. Make a solution consisting of 10L warm water to 100ml of Vinegar.
2. Apply the solution to your tiles and scrub using a white brush pad to dislodge the epoxy residue from the tiles.
3. Clean up the solution and remove the suspended resins using a heavy duty grout sponge.

What is the difference between kerapoxy and kerapoxy design?

Amongst these products, KERAPOXY CQ is used for joints 3 mm wide and above, while KERAPOXY DESIGN has been specifically developed for grouting mosaic with joints up to 3 mm wide.

What is kerapoxy grout?

Kerapoxy® is a premium-grade, water-cleanable, 100%-solids, high-strength epoxy mortar and chemical-resistant nonsagging grout system. Available in all MAPEI colors for grouting, Kerapoxy is excellent for countertops, high-traffic areas, and areas needing stain and chemical resistance.

What is epoxy grout?

Traditional grout is made from a cement based mix. Epoxy grout on the other hand, is made of epoxy resins combined with a filler powder. This makes it waterproof and almost completely resistant to stains. It’s durability makes it the ideal choice for splashbacks, floors and high-traffic areas.

How do you clean MAPEI kerapoxy?

Apply Kerapoxy Cleaner on the surface to be cleaned or on the traces of grout and leave standing for a few minutes. Then rub the surface with a Scotch-Brite® pad (White emulsifying pad) and rinse thoroughly with water. The product is particularly efficient on fresh grout.

What is kerapoxy CQ?

Kerapoxy CQ is an improved two-component, 100%-solids epoxy grout and mortar. Easy to maintain, Kerapoxy CQ will clean to the original color and contains BioBlock® technology to help protect against mold and mildew.

How long does kerapoxy grout take to dry?

Kerapoxy CQ should be cured for at least 10 to 14 days at 73°F (23°C) before water immersion or exposure to chemicals. Longer times will be needed for colder temperatures. Do not allow any activity in the area that will cause dirt or debris to become embedded in the grout joints as they are curing.

Is kerapoxy sanded?

Premium Sanded Grout with Polymer Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing.