The clips are designed to push the pad away from the rotor. This can keep the brakes cooler, reduce noise and extend the life of the pad. The clips fit between the pads and rotor and push the pads away from the rotor..
Accordingly, where do the clips go on brake pads?
At the back of the caliper, you'll find two complex-shaped little twisty spring clips. These springs hold the retaining pins in, which in turn hold the brake pads in.
Beside above, are abutment clips necessary? Abutment clips are exposed to brake system heat and should be considered a wear item that's replaced during any complete brake job. Even if a clip looks brand new, it should be replaced when the pads are replaced. Metal fatigue and heat can cause unseen damage that could cause the pads to wear prematurely.
Similarly, do brake pads come with clips?
Just like brake pads, brake hardware wears out over time. Each kit includes four new clips and pin boots in order to keep the new brake pads securely in place.
Do EBC brake pads need shims?
Brake squeal often happens during the first few hundred miles of use as pads bed in to a new or used rotor. In early production some EBC REAR fitment pads did not have noise shims. We offer to mail these free of charge if you have rear brake noise which is the most common.
Related Question Answers
What are abutment clips?
Abutment Clips. Abutment clips reside on the caliper bracket lands on most vehicles. They create a uniform surface for the pads to make contact with. New abutment clips are being used on some new vehicles that help to push the pads back from the rotor to reduce drag and allow for less wear on the pads and rotors.What is a spreader spring for brake pads?
The springs are designed to slightly unload the brake pads from the rotors and reduce wheel drag from pad. You can use them or not w/ no noticeable consequence.Can you drive without brake clips?
Driving without the anti-rattle clip is not dangerous. You may experience strange noises. Prolonged driving without the clip may also cause weird pad wear.Do I need shims on my brake pads?
Not all brake pads come with shims as they aren't required and function perfectly without needing them. This doesn't require the use of disc brake lube, but you can still apply a thin coating on top of the brake backing plate. Lastly, there are also titanium brake pad shims which act as an improved thermal barrier.Does the brake pad with the clip go on the inside or outside?
If the caliper is mounted on the car, the pad with the wear indicator clip should be on the inside (middle of car) position on the caliper (should be the piston side, IIRC), and the clip at the top of the caliper.Are brake pads necessary?
Why is it Important to Replace Brake Pads? Brakes pads are the reason your car is able to stop. When you press on the brake pedal, the brake pads apply friction against a metal disc or drum that halts the vehicle. Because of this friction, brake pads wear down over time.What does a brake clip do?
Brake calipers squeeze the brake pads against the surface of the brake rotor to slow or stop the vehicle. When you step on the brake, brake fluid from the master cylinder creates hydraulic pressure on one or more pistons in the brake caliper, forcing the pads against the rotor.What holds the brake caliper in place?
The caliper works on pressurized brake fluid through a piston in the caliper. The caliper mounting bracket is bolted to the spindle, and holds the brake pads in position relative to the brake rotor. The caliper fits over the pads and is fastened to the brackets with special sliding bolts. 
