What is the setting for Scotts speedy green 3000?
If this is what you meant, or those two spreaders are compatible with settings, you can use setting 2 3/4 for putting out 1.15 lbs per 1000 sq/ft, 5 1/4 for 2.3lbs per 1000 sq/ft, or 9 for putting out 4.6 lbs per 1000 sq/ft.
What setting should I put my fertilizer spreader on?
Set your spreader so that it’s ¾ open when engaged. If, for example, the spreader is calibrated 1 to 20, set it at 15. Place eight pounds of Milorganite into the spreader’s hopper.
What setting should I set the Edgeguard Mini for fertilizer?
The Edgeguard Mini can hold up to 5,000 square feet of lawn products, like fertilizer and seed. With dial settings from 2 to 15, this broadcast spreader can handle a wide range of different sized products. When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13.
What is the setting for Scotts speedy green 2000?
per 1,000 square feet, set your Scott’s Speedy Green 2000 to 3.75. Set the knob at 7.0 to spread at 4.6 lbs. per 1,000 square feet.
Should I water after fertilizing?
Fertilizer and Water After grass dries, apply fertilizer. Then lightly water again. This second watering is vitally important, because it washes fertilizer off grass blades and into soil. You can also time fertilizer application between rainfalls to let rain wash fertilizer into soil.
What number do I set my Scotts broadcast spreader to?
For a pushed broadcast spreader, Scotts recommends a setting of 2 1/4 when overseeding and a bare-lawn setting of 4. For application with a handheld broadcast spreader, use a setting of 3 when overseeding and 4 when planting a bare lawn.
What do spreader settings mean?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. In general, the smaller you set your spreader setting the smaller the hole and the slower the material releases from the hopper.
What setting should I use on Scotts EdgeGuard for grass seed?
When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13. For overseeding applications, set the dial to 7 1/2. Using your Edgeguard Mini broadcast spreader correctly will ensure accurate, even coverage and reduce wasting costly seed.
