Connecting With a Component Cable Start by connecting the red cable to the red RCA connector on each piece of equipment because they already match. As long as each cable goes to the matching RCA connection at each end, you should get your audio and video signals just fine..
Hereof, can I plug RCA into YPbPr?
The same cables can be used for YPbPr and composite video. This means that the yellow, red, and white RCA connector cables commonly packaged with most audio/visual equipment can be used in place of the YPbPr connectors, provided the end user is careful to connect each cable to corresponding components at both ends.
Beside above, can you plug AV cables into component slots? If you have more than one set of component inputs, it's the first set that generally works with standard AV cables. Look for a set that has a green input with yellow around it, or the word video just above or below it. Plug the yellow end of the Wii A/V cable into this green Y input.
Similarly, you may ask, what is the difference between RCA and component cables?
Difference Between RCA and Component. RCA and Component are two types of cables that are used in analog signal transmission. With component, the video signal is split into two or more signals that are sent separately. In comparison, RCA is a type of cable and plug that is predominantly used to send analog signals.
Can you hook up RCA to component?
The bottom line is that if you don't have an old-school red, yellow and white cable lying around, you can use a red, green and blue component cable to do the same job. As long as each cable goes to the matching RCA connection at each end, you should get your audio and video signals just fine.
Related Question Answers
Can yellow RCA be used for audio?
The RCA connector is a coaxial connector that is simply pushed into its socket with your bare hand. The Red and White colors are associated to Audio while the Yellow is used for Video. There are no physical differences between the different colors, this is only to allow users plug the wires correctly.Is there a difference between audio and video RCA cables?
In most cases there is really no difference between the cables as the only difference is the signal that they actually carry. The RCA cable is typically composed of 3 cables that would carry 1 for video and 2 for audio (left and right channels). The three cables can be easily swapped without compromising performance.What is RCA input?
It will usually be labelled as an input or an output. An output is for sending the audio from this device to another. An input is for receiving the audio from somewhere else. The RCA connectors are usually colored white for the left channel and red for the right channel.How do you hook up RCA cables?
Plug the red and white RCA cables into the color-coded RCA audio output jacks on the device, beside the component outputs. Plug the other end of the component cables into the corresponding, color-coded input jacks on the rear of the HDTV. Plug the RCA audio cables into the RCA inputs beside the component inputs.Does component carry audio?
Component video can be contrasted with composite video (NTSC, PAL or SECAM) in which all the video information is combined into a single line level signal that is used in analog television. Like composite, component-video cables do not carry audio and are often paired with audio cables.Is component as good as HDMI?
Component cables deliver video and do not carry sound. Which will deliver better HD picture quality, HDMI or Component Video? The answer is most people will not notice the difference between the two. However, HDMI is able to deliver 1080p while component cables can only deliver 1080i.Are there different types of RCA cables?
There are different types of RCA cables that can work to serve different purposes. The two most commonly used are composite and component cables.What is the difference between RCA and RGB cables?
An “RCA” cable refers to the type of the connector. A typical RCA connector on a cable can be used to transmit audio or video. An RGB cable refers to 'red, blue, green' the components of a video signal. They typically use the 'RCA' type cable ends.What is RCA composite?
Composite RCA cables feature one yellow connector for video, and red and white connectors for audio. Component cables use the red and white audio connectors, but they divide the video into three components: one for luma (brightness) and two for color information.Can I plug component into composite?
Composite and Component Video Input Sharing As shown in the above photo illustration, component video cables can be connected as they would normally, but you can also use the Green component video input connection to connect a composite video connection.Is composite analog or digital?
Composite video is an analog video transmission that carries standard definition video typically at 480i or 576i resolution as a single channel.Are all component cables the same?
No, there are indeed higher quality component cables. Analog signals can degrade, and I have had both low and high quality component cables -- I can see a difference. Conversely, HDMI is all-digital meaning the signal either gets there or it doesn't.What do RCA cables look like?
Audio Cables. Analog RCA cables use these connectors -- red for the right stereo channel and white or black for the left. These are the cables with red and white, or sometimes red and black connectors. RCA cables are widely used to connect devices like VCRs and DVD players to TV sets or CD players to stereo receivers.What is Y Pb and Pr connections?
Basically, Y, Pb, and Pr are component video cables. The Y cable should be connected to the HD decoder, the Pb cable to the Pb outlet, and the Pr cable to the Pr outlet. In most consumer electronics, Y is green, Pb is blue, and Pr is red.What is the blue RCA cable for?
Most Common Colors Composite video means that the red, green and blue video signals are all being carried by a single cable. In the color code, red and white stand for audio to the right and left speakers respectively, and yellow stands for composite video.Are AV cables and component cables the same?
Difference Between Composite & Component AV Cable. Composite cable and component cables have similar names and both use RCA connectors; these traits in common often confuse people. However, despite these similarities there are several differences between these two audio-visual cable types.What order do AV cables go in?
On your television, locate a set of yellow, red, and white holes labeled "Input." Audio/Video (AV) inputs are typically located on the back of the TV, but occasionally are on the sides, top, or bottom. They may also be located behind a hidden panel or door in the television.What are the green blue and red AV cables for?
The blue, green, and red are component video and carry an analog video signal that is broken into 3 separate “components” One luma (black and white) signal on the green wire, and 2 chroma (color) on the red and blue wires. The yellow composite cable can only output a 480i signal.What is an AV input jack?
AV input is a common label on a connector to receive (AV) audio/visual signals from electronic equipment that generates AV signals (AV output). 
